IPIFY - MULTI PRO
Ipify Family logo

What is “IPIFY by INTERCOAX” ?

There are more than 50 products in our extensive LRE offering. To make it easy to specify the selection of products and your bill of materials (BOM), we introduce you to our new product family “IPIFY”. The “IPIFY” product family consists of 4 product groups, allowing you to make an easy choice in a range of preconfigured set of products. By means of 4 colours, we have created a user friendly and very easy set up: the packages are available for 1, 4, 8 and 16 port units. All products meet the new global ETSI standard (TS 105 176) on IEEE 1901. They are all fully interoperable, preconfigured and are very intuitive for installation which allows fast, non-intrusive and cost-effective LRE installations, for single port connections through to multiport systems in both managed or unmanaged applications.
Ipify Multi Pro Packs logo
MULTIPORT PACKS / 4-8-16 PORTS
L2 MANAGED SWITCH
60W POE / PORT
19” MOUNTING BRACKETS
Ipify Multi Pro Packs schema

The connection diagram is the same for all MULTIPORT PACKS:

  • The BLUE marked TX goes with the BLUE Mark marked RX port
  • The GREEN marked TX goes with the GREEN marked RX port
  • The YELLOW marked TX goes with the YELLOW marked RX port
  • The RED marked TX goes with the RED marked RX port
Ipify Multi Pro Packs
ECP-2808RM-4T-PKG (for coax)
Included: 4 x transmitters, 1 x 8-way receiver
Optional: up to 4 extra ECP-2601T-GREEN (transmitters)
Products overview
ECP-2601-TR
Single-Port Product
  • Ethernet over Coax communication following IEEE1901 Standard
  • Data + Power over Coax cable (or UTP, 2-Wire) 
  • Data distance up to 2.4Km
  • PoE distance up to 1.2Km
  • Max. 95Mbps Bandwidth (270Mbps between Intercoax 2 series models)
  • 10/100 Full Duplex
  • 128bit AES network encryption
  • Supports Multi-connection (Daisy chain, Star, etc.)
  • PoE, PoE+, Extra PoE (Max. 60W output)
  • Supports UTP, Telephone (2 Pairs), 2-Wire cable communication (Using BTE Series)
  • Quality LED (Data, Power, Link, PoE)
  • Plug & Play
  • Surge Protection
  • Support PoE+ Input (25.5W) from PSE devices – ECP-2601R Only
  • Slim design

Category Language Size File
Catalog Eng 13.36 MB IPIFY_catalogue_English_Rev.5_10_11_2020_NEW.pdf
Catalog Eng 16.36 MB IPIFY_case_studies_guide_English_Rev.2_10_11_2020.pdf
Application & Solution Guide Eng 304.19 KB tr_105177v010101p.pdf
Application & Solution Guide Eng 7.26 MB IPIFY_application_guide_English_Rev.2_10_11_2020.pdf
Manual Eng 476.67 KB ECP-2601-TR.pdf
Specsheet Eng 434.66 KB Specsheet_ECP-2601TR_Eng_Rev5.0_190228.pdf
A&E Specifications Eng 195.05 KB ECP-2601-TR_A&E.pdf
A&E Specifications Eng 185.43 KB ECP-2601T-BLUE_A&E.pdf
ECP-2808RM
Managed Multi-Port Product
  • Total management software, “Intercoax ECP Manager Full version” included
  • Friendly Graphic User Interface with EasyView can easily access and monitor multiple ECP-2808RM/2816RM
  • Configure Join & Unjoin, Changing joining password and power reset of remotely connected devices
  • Real-time monitoring of power consumption for each port
  • Multicast Setting with IGMP Query & Report Generator
  • SNMP/SSH 
  • VLAN/QoS
  • Port Locking by MAC Addresses
  • Alarm LED & buzzer built-in switch and notification on ECP Manager
  • Scheduled event reporting and alert reporting to designative users
  • Back up & Restore of configuration
  • 8 Port long distance EoC up to 2.4Km
  • PoE/ PoE+/ Extra PoE up to 60W (PoE++) per B-Linx port
  • Each port has Auto Power Short Protection. When the cable is being shorted or damaged, it won’t transmit power until the cable is fixed
  • B-Linx Device Detection will secure the power transmission only to B-Linx devices
  • 320W Built-in Power Supply
  • Built-in crosstalk cancelling technology
  • B-Linx Multiple Nodes can be used (Daisy Chain, Star, Etc.) on each port
  • All IEEE1901-HPAV standard EoC devices can be easily connected remotely
  • 19-inch(1U) rack mountable design
  • Giga-bit SFP and Copper uplink port
  • Supports UTP, Telephone (2 Pairs), 2-Wire cable communication (Using BTE Series)
  • Surge Protection

Category Language Size File
Catalog Eng 13.36 MB IPIFY_catalogue_English_Rev.5_10_11_2020_NEW.pdf
Catalog Eng 16.36 MB IPIFY_case_studies_guide_English_Rev.2_10_11_2020.pdf
Application & Solution Guide Eng 304.19 KB tr_105177v010101p.pdf
Application & Solution Guide Eng 7.26 MB IPIFY_application_guide_English_Rev.2_10_11_2020.pdf
Manual Eng 9.93 MB ECP-28xxRM_3.0_Manual.pdf
Manual Eng 500.48 KB ECP-2808RM-4T-PKG.pdf
Manual Eng 505.47 KB ECP-2808RM-8T-PKG.pdf
Manual Eng 503.08 KB ETP-2808RM-4T-PKG.pdf
Manual Eng 505.64 KB ETP-2808RM-8T-PKG.pdf
Specsheet Eng 1.53 MB Specsheet_ECP-2808-16RM_Eng_Rev5.0_190228.pdf
Software Eng 57.55 KB ECP_Manager_SNMP_MIB.pdf
Software Eng 18.12 MB ECPManager_v3.0.zip
Software Eng 3.36 MB INTERCOAX_MANAGER.zip
A&E Specifications Eng 185.43 KB ECP-2601T-BLUE_A&E.pdf
A&E Specifications Eng 240.87 KB ECP-2808RM-4T-PKG_A&E.pdf
A&E Specifications Eng 284.59 KB ECP-2808RM-8T-PKG_A&E.pdf
ECP-2808RM-8T-PKG (for coax)
Included: 4 x transmitters, 1 x 8-way receiver
Products overview
ECP-2816RM-8T-PKG (for coax)
Included: 8 x transmitters, 1 x 16-way receiver
Optional: up to 4 extra ECP-2601T-YELLOW and 4 extra ECP-2601T-RED (transmitters)
Products overview
ECP-2816RM-16T-PKG (for coax)
Included: 16 x transmitters, 1 x 16-way receiver
Products overview
EUP-2808RM-4T-PKG (for UTP/FTP/STP cat cable)
Included: 4 x transmitters, 1 x 8-way receiver
Optional: up to 4 extra EUP-2601T-GREEN (transmitters)
Products overview
EUP-2808RM-8T-PKG (for UTP/FTP/STP cat cable)
Included: 8 x transmitters, 1 x 8-way receiver
Products overview
EUP-2816RM-8T-PKG (for UTP/FTP/STP cat cable)
Included: 8 x transmitters, 1 x 16-way receiver
Optional: up to 4 extra EUP-2601T-YELLOW and 4 extra EUP-2601T-RED (transmitters)
Products overview
EUP-2816RM-16T-PKG (for UTP/FTP/STP cat cable
Included: 16 x transmitters, 1 x 16-way receiver
Products overview
ETP-2808RM-4T-PKG (for 2-wire / audio cable)
Included: 4 x transmitters, 1 x 8-way receiver
Optional: up to 4 extra ETP-2601T-GREEN (transmitters)
Products overview
ETP-2808RM-8T-PKG (for 2-wire audio cable)
Included: 8 x transmitters, 1 x 8-way receiver
Products overview
ETP-2816RM-8T-PKG (for 2-wire / audio cable)
Included: 8 x transmitters, 1 x 16-way receiver
Optional: up to 4 extra ETP-2601T-YELLOW and 4 extra ETP-2601T-RED (transmitters)
Products overview
ETP-2816RM-16T-PKG (for 2-wire / audio cable)
Included: 16 x transmitters, 1 x 16-way receiver
Products overview